Overview

This 3 day course gives network professionals a functional understanding of BIG-IP Local Traffic Manager, introducing students to both commonly used and advanced BIG-IP LTM features and functionality. Incorporating lecture, extensive hands-on labs, and classroom discussion, the course helps students build the well-rounded skill set needed to manage BIG-IP LTM systems as part of a flexible and high performance application delivery network. This course is intended for system and network administrators responsible for installation, setup, configuration, and administration of the BIG-IP LTM system.

Read more +

Prerequisites

IMPORTANT INFORMATION: Students must complete one of the following F5 prerequisites before attending this course:

  • Administering BIG-IP instructor-led course
  • F5 Certified BIG-IP Administrator

F5 have advised that with the introduction of v13 there is no longer any overlap between the BIG-IP Admin course and the Configuring LTM course. This has started to present many issues for delegates attending the LTM course without having sufficient BIG-IP Admin skills. To help solve this F5 US has brought out a BIG-IP Admin exam which can be taken before attending the LTM course. Indeed, this test should be taken by anyone wanting to attend any of the F5 specialist classes (DNS, APM, ASM, AFM etc.) if they have not attended the BIG-IP Admin or LTM class. Although this is not mandatory, F5 would like to stress the importance of anyone attending F5 specialist classes if they have not attended an Admin class or passed the test below with 70% or greater. Obviously, a 201 BIG-IP Administrator exam certification is an instant prerequisite.

  • Step 1: get an account on F5 University (https://university.f5.com)
  • Step 2: goto: https://wbt.training.f5.com/wbt/go?id=2110 Take the test. Pass mark is 70%.
  • Step 3: take a screen shot as proof of your results. Please note that if this prerequisite is not met, the supplier reserves the right to refuse entry to the class without refund.

The following free web-based courses, although optional, will be very helpful for any student with limited BIG-IP administration and configuration experience:

  • Getting Started with BIG-IP web-based training
  • Getting Started with BIG-IP Local Traffic Manager (LTM) web-based training

The following general network technology knowledge and experience are recommended before attending any F5 Global Training Services instructor-led course:

  • OSI model encapsulation
  • Routing and switching
  • Ethernet and ARP
  • TCP/IP concepts
  • IP addressing and subnetting
  • NAT and private IP addressing
  • Default gateway
  • Network firewalls
  • LAN vs. WAN

The following course-specific knowledge and experience is suggested before attending this course:

  • Web application delivery
  • HTTP, HTTPS, FTP and SSH protocols
  • TLS/SSL
Read more +

Delegates will learn how to

  • BIG-IP initial setup (licensing, provisioning, and network configuration)
  • A review of BIG-IP local traffic configuration objects
  • Using dynamic load balancing methods
  • Modifying traffic behavior with persistence (including SSL, SIP, universal, and destination address affinity persistence)
  • Monitoring application health with Layer 3, Layer 4, and Layer 7 monitors (including transparent, scripted, and external monitors)
  • Processing traffic with virtual servers (including network, forwarding, and reject virtual servers)
  • Processing traffic with SNATs (including SNAT pools and SNATs as listeners)
  • Configuring high availability (including active/standby and N+1 sync failover device groups, connection and persistence mirroring, and sync-only device groups)
  • Modifying traffic behavior with profiles (including advanced HTTP profile options, caching, compression, and OneConnect profiles)
  • Advanced BIG-IP LTM configuration options (including VLAN tagging and trunking, SNMP features, and packet filters)
  • Deploying application services with iApps
  • Customizing application delivery with iRules and local traffic policies

By the end of this course, the student should be able to use both the Configuration utility, TMSH, and Linux commands to configure and manage BIG-IP LTM systems in an application delivery network. In addition, students should be able to monitor the BIG-IP system to achieve operational efficiency, and establish and maintain high availability infrastructure for critical business applications.

Read more +

Outline

  • Chapter 1: Setting Up the BIG-IP System
    • Introducing the BIG-IP System
    • Initially Setting Up the BIG-IP System
    • Archiving the BIG-IP Configuration
    • Leveraging F5 Support Resources and Tools
  • Chapter 2: Reviewing Local Traffic Configuration
    • Reviewing Nodes, Pools, and Virtual Servers
    • Reviewing Address Translation
    • Reviewing Routing Assumptions
    • Reviewing Application Health Monitoring
    • Reviewing Traffic Behavior Modification with Profiles
    • Reviewing the TMOS Shell (TMSH)
    • Reviewing Managing BIG-IP Configuration Data
  • Chapter 3: Load Balancing Traffic with LTM
    • Exploring Load Balancing Options
    • Using Priority Group Activation and Fallback Host
    • Comparing Member and Node Load Balancing
  • Chapter 4: Modifying Traffic Behavior with Persistence
    • Reviewing Persistence
    • Introducing SSL Persistence
    • Introducing SIP Persistence
    • Introducing Universal Persistence
    • Introducing Destination Address Affinity Persistence
    • Using Match Across Options for Persistence
  • Chapter 5: Monitoring Application Health
    • Differentiating Monitor Types
    • Customizing the HTTP Monitor
    • Monitoring an Alias Address and Port
    • Monitoring a Path vs. Monitoring a Device
    • Managing Multiple Monitors
    • Using Application Check Monitors
    • Using Manual Resume and Advanced Monitor Timer Settings
  • Chapter 6: Processing Traffic with Virtual Servers
    • Virtual Servers Concepts
    • Path Load Balancing
    • Introducing Auto Last Hop
  • Chapter 7: Processing Traffic with SNATs
    • Overview of SNATs
    • SNAT Auto Map
    • Using SNAT Pools
    • SNATs as Listeners
    • SNAT Specificity
    • VIP Bounceback
    • Additional SNAT Options
    • Network Packet Processing
  • Chapter 8: Configuring High Availability
    • Sync-Failover Group Concepts
    • Synchronization, State and Failover
    • Traffic Group Concepts
    • N+1 Concepts
  • Chapter 9: Configuring High Availability Part 2
    • Failover Triggers and Detection
    • Stateful Failover
    • Device Group Communication
    • Sync-Only Device Groups
  • Chapter 10: Modifying Traffic Behavior with Profiles
    • Profiles Overview
    • Common Protocol Profile Types and Settings
    • TCP Express Optimization
    • Performance Improvements
    • Configuring and Using Profiles
    • HTTP Profile Options
    • OneConnect
    • Offloading HTTP Compression to BIG-IP
    • HTTP Caching
    • Stream Profiles
    • F5 Acceleration Technologies
    • Analytics
  • Chapter 11: Selected Topics
    • VLAN, VLAN Tagging, and Trunking
    • Restricting Network Access
    • SNMP Features
    • Internet Protocol Version 6 (IPv6)
  • Chapter 12: Deploying Application Services with iApps
    • Simplifying Application Deployment with iApps
    • Using iApps Templates
    • Deploying an Application Service
    • Reconfiguring an Application Service
    • Leveraging the iApps Ecosystem on DevCentral
  • Chapter 13: Customizing Application Delivery with iRules and Local Traffic Policies
    • Getting Started with iRules
    • Triggering an iRule
    • Introducing iRule Constructs
    • Leveraging the DevCentral Ecosystem
    • Deploying and Testing iRules
    • Getting Started with Local Traffic Policies
      • What Can You Do with a Local Traffic Policy?
      • How Does a Local Traffic Policy Work?
      • Understanding Local Traffic Policy Workflow
      • Introducing the Elements of a Local Traffic Policy
      • Specifying the Matching Strategy
      • What Are Rules?
      • Understanding Requires and Controls
    • Configuring and Managing Policy Rules
      • Configuring a New Rule
      • Including Tcl in Certain Rule Setting
  • Chapter 14: Final Lab Project
  • Chapter 15: Additional Training and Certification
    • Getting Started Series Web-Based Training
    • F5 Instructor Led Training Curriculum
    • F5 Professional Certification Program
  • Appendix A: Troubleshooting
    • Working with F5 Support
Read more +

Why choose QA

Dates & Locations

Need to know

Frequently asked questions

How can I create an account on myQA.com?

There are a number of ways to create an account. If you are a self-funder, simply select the "Create account" option on the login page.

If you have been booked onto a course by your company, you will receive a confirmation email. From this email, select "Sign into myQA" and you will be taken to the "Create account" page. Complete all of the details and select "Create account".

If you have the booking number you can also go here and select the "I have a booking number" option. Enter the booking reference and your surname. If the details match, you will be taken to the "Create account" page from where you can enter your details and confirm your account.

Find more answers to frequently asked questions in our FAQs: Bookings & Cancellations page.

How do QA’s virtual classroom courses work?

Our virtual classroom courses allow you to access award-winning classroom training, without leaving your home or office. Our learning professionals are specially trained on how to interact with remote attendees and our remote labs ensure all participants can take part in hands-on exercises wherever they are.

We use the WebEx video conferencing platform by Cisco. Before you book, check that you meet the WebEx system requirements and run a test meeting (more details in the link below) to ensure the software is compatible with your firewall settings. If it doesn’t work, try adjusting your settings or contact your IT department about permitting the website.

How do QA’s online courses work?

QA online courses, also commonly known as distance learning courses or elearning courses, take the form of interactive software designed for individual learning, but you will also have access to full support from our subject-matter experts for the duration of your course. When you book a QA online learning course you will receive immediate access to it through our e-learning platform and you can start to learn straight away, from any compatible device. Access to the online learning platform is valid for one year from the booking date.

All courses are built around case studies and presented in an engaging format, which includes storytelling elements, video, audio and humour. Every case study is supported by sample documents and a collection of Knowledge Nuggets that provide more in-depth detail on the wider processes.

When will I receive my joining instructions?

Joining instructions for QA courses are sent two weeks prior to the course start date, or immediately if the booking is confirmed within this timeframe. For course bookings made via QA but delivered by a third-party supplier, joining instructions are sent to attendees prior to the training course, but timescales vary depending on each supplier’s terms. Read more FAQs.

When will I receive my certificate?

Certificates of Achievement are issued at the end the course, either as a hard copy or via email. Read more here.

Let's talk

By submitting this form, you agree to QA processing your data in accordance with our Privacy Policy and Terms & Conditions. You can unsubscribe at any time by clicking the link in our emails or contacting us directly.