Overview
This course provides additional knowledge of the advanced capabilities of HPE Nimble Storage arrays, including multi-array groups and pools, replication, disaster recovery, VMware® vVols, configuration of syslog and SNMP trap forwarding, and audit logs and event logs. Using extensive hands-on lab exercises that comprise over 70% of the course, you gain a practical understanding of HPE Nimble Storage integration with Microsoft Windows, Linux, VMware, Veeam, and Commvault.
Delegates will learn how to
Prerequisites
Prior to attending this course, students
should complete one of the following
courses:
• HJ7C5S: HPE Nimble I: Management and
Local Replication
• H6LH8S: HPE Nimble Storage
Introduction and Administration
• H9TH5S: HPE Nimble Storage
Introduction and Administration (with
extended lab time)
• H9TH6AAE: Introduction to HPE Nimble
Storage and InfoSight Analytics, Rev.
18.41
• H9TH1S: Designing HPE Nimble
Solutions, Rev. 18.21 (01113228)
Outline
Module 1: Course Introduction
• Agenda
• Topics review Module 2: Architecture and Advanced Features
• Read and write operations
• HPE Nimble FS
• Triple+ Parity RAID
• Sparing
• Deduplication
• Encryption
Module 3: HPE Nimble Storage Replication and Peer Persistence
• Disaster recovery terminology (planning, RPO, RTO, etc.)
• SmartReplicate overview
• Async replication
• Sync replication
• Replication capabilities (architecture, topologies including fan-out, etc.)
• SmartReplicate operations
• Peer persistence architecture and operations
Module 4: Scale-out, Multi-Array Groups and Pools
• Scale-to-fit review
• Scale-out groups
• Scale-out pools
• Scale-out operations
• Scale-out limitations and rules
• Group merge
• Host operation in pools
• Multi-array groups and pools
Module 5: Windows Integration
• VSS theory
• VSS in use on HPE Nimble
• NWT components review
• Space reclamation
Module 6: Linux Integration, Oracle and Docker Integration
• HPE Nimble Storage Linux Toolkit (NLT)
• NCM
• HPE Nimble Storage Oracle Application Data Manager
• HPE Nimble Host Tuning Utility/Nimbletune
• Space reclamation
Module 7: VMware Integration
• VMware integration features
• NCM
• VMware vCenter® integration
• SRM integration
• Synchronized snapshots
• APIs and space reclamation
• vVols
• dHCI introduction
Module 8: Backup Solution Integration
• HPE RMC overview and basic architecture
• Veeam overview and basic architecture
• Commvault overview and basic architecture
• Additional data protection training
Frequently asked questions
See all of our FAQsHow can I create an account on myQA.com?
There are a number of ways to create an account. If you are a self-funder, simply select the "Create account" option on the login page.
If you have been booked onto a course by your company, you will receive a confirmation email. From this email, select "Sign into myQA" and you will be taken to the "Create account" page. Complete all of the details and select "Create account".
If you have the booking number you can also go here and select the "I have a booking number" option. Enter the booking reference and your surname. If the details match, you will be taken to the "Create account" page from where you can enter your details and confirm your account.
Find more answers to frequently asked questions in our FAQs: Bookings & Cancellations page.
How do QA’s virtual classroom courses work?
Our virtual classroom courses allow you to access award-winning classroom training, without leaving your home or office. Our learning professionals are specially trained on how to interact with remote attendees and our remote labs ensure all participants can take part in hands-on exercises wherever they are.
We use the WebEx video conferencing platform by Cisco. Before you book, check that you meet the WebEx system requirements and run a test meeting (more details in the link below) to ensure the software is compatible with your firewall settings. If it doesn’t work, try adjusting your settings or contact your IT department about permitting the website.
Learn more about our Virtual Classrooms.
How do QA’s online courses work?
QA online courses, also commonly known as distance learning courses or elearning courses, take the form of interactive software designed for individual learning, but you will also have access to full support from our subject-matter experts for the duration of your course. When you book a QA online learning course you will receive immediate access to it through our e-learning platform and you can start to learn straight away, from any compatible device. Access to the online learning platform is valid for one year from the booking date.
All courses are built around case studies and presented in an engaging format, which includes storytelling elements, video, audio and humour. Every case study is supported by sample documents and a collection of Knowledge Nuggets that provide more in-depth detail on the wider processes.
Learn more about QA’s online courses.
When will I receive my joining instructions?
Joining instructions for QA courses are sent two weeks prior to the course start date, or immediately if the booking is confirmed within this timeframe. For course bookings made via QA but delivered by a third-party supplier, joining instructions are sent to attendees prior to the training course, but timescales vary depending on each supplier’s terms. Read more FAQs.
When will I receive my certificate?
Certificates of Achievement are issued at the end the course, either as a hard copy or via email. Read more here.