About this Course

Duration 1 Day
Special Notices

If both classroom and virtual dates are available for this course please specify your preference when booking.

The Certified Wireless Technician (CWT) is an individual who can install APs based on a design document, configure the AP for initial operations and ensure connectivity. The individual can troubleshoot basic problems and assist users in-person or through remote communications in problem resolution. The ability to configure a WLAN client for connectivity is paramount with an understanding of the configuration process for SSIDs, security settings and other client adapter settings. This individual is not responsible for WLAN design, analysis or security design; however, the CWT should be able to gather information from a design specification document to properly configure an AP and troubleshoot individual connection issues. The CWT may not be aware of the actual WLAN architectural design, the RF design or the full feature set in use to implement the WLAN.The CWT certification is an entry-level WLAN certification from the vendor-neutral CWNP organization that brought you CWNA and other advanced certifications. To earn the CWT certification, you must pass an online exam with a score of 70% or higher.


Students should have basic networking knowledge, including understanding of the OSI Reference model.

Delegates will learn how to

Upon completing this course, the learner will be able to meet these overall objectives:

  • Understand Basic RF Hardware and Functions
  • Identify 802.11 Features and Functions
  • Identify Wireless LAN Hardware and Software
  • Understand Organizational Goals


RF Frequency Fundamentals

  • Identify RF Characteristics
  • Explain basic RF Behaviours
  • Understand how to detect RF Signal Factors

Antennas and Accessories

  • Describe the basic differences among antenna types
  • Select the appropriate external antenna when required

The 802.11 Channels and Operations

  • Know the Frequency bands used
  • Explain the basic WLAN location process
  • Describe the basic steps required in the WLAN connection process
  • Determine the channels and streams supported by client devices

WLAN Clients : Features and Capabilities

  • Describe client types and varying capabilities
  • Determine the channels and streams supported by client devices

WLAN Clients: configuration and Management

  • Configure client devices
  • Configure various client operating systems for wireless connectivity

WLAN APS: Hardware and Mounting

  • Identify AP features and capabilities and understand configuration options related to them
  • Select appropriate mounding kits for a specified installation location
  • Ensure proper PoE provisioning when required

WLAN APs: Configuration and Management

  • Configure APS as standalone devices
  • Validate AP wired interface connectivity
  • Validate proper AP WLAN configuration

WLAN Security

  • Understand the basics of 802.11 security solutions
  • Identify legacy security technologies that should not be used
  • Configure security parameters in an AP
  • Configure security Parameters in a client device

Troubleshooting Connection Issues

  • Troubleshoot connectivity problems
  • Troubleshoot performance problems
  • Troubleshoot security problems
  • Troubleshoot mobility problems

Instructor Demo

  • Configuring a client
  • Verifying POE Power
  • Configuring an AP
  • Configuring Security Settings
  • Troubleshooting with Spectrum Analyzer. Protocol Analyzer and Wi-Fi Scanner

1 Day

Delivery Method

Delivery method


Face-to-face learning in the comfort of our quality nationwide centres, with free refreshments and Wi-Fi.

Trusted, awarded and accredited

Fully accredited to ensure we provide the highest possible standards in learning

All third party trademark rights acknowledged.