About this course

Course code TPFL-CCIET
Duration 5 Days
Special Notices

If both classroom and virtual dates are available for this course please specify your preference when booking.

This is a 5 day class to designed to prepare delegates for the Cisco CCIE 360 R&S written exam. This course will help to prepare delegates who are looking to re-certify their CCIE as well as first time CCIE students. The written exam consists of 100 multiple choice questions and is 2 hours in length.

Prerequisites

  • At least 5 years hands on experience in Cisco Routing & Switching
  • CCNP level (either certified or equivalent knowledge)
  • Dedication to go above and beyond

Outline

Implement Layer 2 Technologies

  • Implement Spanning Tree Protocol (STP)
    • 802.1d
    • 802.1w
    • 802.1s
    • Loop guard
    • Root guard
    • Bridge protocol data unit (BPDU) guard
    • Storm control
    • nicast flooding
    • Port roles, failure propagation, and loop guard operation
  • Implement VLAN and VLAN Trunking Protocol (VTP)
  • Implement trunk and trunk protocols, EtherChannel, and load-balance
  • Implement Ethernet technologies
    • Speed and duplex
    • Ethernet, Fast Ethernet, and Gigabit Ethernet
    • PPP over Ethernet (PPPoE)
  • Implement Switched Port Analyzer (SPAN), Remote Switched Port Analyzer (RSPAN), and flow control
  • Implement Frame Relay
    • Local Management Interface (LMI)
    • Traffic shaping
    • Full mesh
    • Hub and spoke
    • Discard eligible (DE)
  • Implement High-Level Data Link Control (HDLC) and PPP

Implement IPv4

  • Implement IP version 4 (IPv4) addressing, subnetting, and variable-length subnet masking (VLSM)
  • Implement IPv4 tunneling and Generic Routing Encapsulation (GRE)
  • Implement IPv4 RIP version 2 (RIPv2)
  • Implement IPv4 Open Shortest Path First (OSPF)
    • Standard OSPF areas
    • Stub area
    • Totally stubby area
    • Not-so-stubby-area (NSSA)
    • Totally NSSA
    • Link-state advertisement (LSA) types
    • Adjacency on a point-to-point and on a multi-access network
    • OSPF graceful restart
  • Implement IPv4 Enhanced Interior Gateway Routing Protocol (EIGRP)
    • Best path
    • Loop-free paths
    • EIGRP operations when alternate loop-free paths are available, and when they are not available
    • EIGRP queries
    • Manual summarization and autosummarization
    • EIGRP stubs
  • Implement IPv4 Border Gateway Protocol (BGP)
    • Next hop
    • Peering
    • Internal Border Gateway Protocol (IBGP) and External Border Gateway Protocol (EBGP)
  • Implement policy routing
  • Implement Performance Routing (PfR) and Cisco Optimized Edge Routing (OER)
  • Implement filtering, route redistribution, summarization, synchronization, attributes, and other advanced
  • features

Implement IPv6

  • Implement IP version 6 (IPv6) addressing and different addressing types
  • Implement IPv6 neighbor discovery
  • Implement basic IPv6 functionality protocols
  • Implement tunneling techniques
  • Implement OSPF version 3 (OSPFv3)
  • Implement EIGRP version 6 (EIGRPv6)
  • Implement filtering and route redistribution

Implement MPLS Layer 3 VPNs

  • Implement Multiprotocol Label Switching (MPLS)
  • Implement Layer 3 virtual private networks (VPNs) on provider edge (PE), provider (P), and customer
  • edge (CE) routers
  • Implement virtual routing and forwarding (VRF) and Multi-VRF Customer Edge (VRF-Lite)

Implement IP Multicast

  • Implement Protocol Independent Multicast (PIM) sparse mode
  • Implement Multicast Source Discovery Protocol (MSDP)
  • Implement interdomain multicast routing
  • Implement PIM Auto-Rendezvous Point (Auto-RP), unicast rendezvous point (RP), and bootstrap router
  • (BSR)
  • Implement multicast tools, features, and source-specific multicast
  • Implement IPv6 multicast, PIM, and related multicast protocols, such as Multicast Listener Discovery (MLD)

Implement Network Security

  • Implement access lists
  • Implement Zone Based Firewall
  • Implement Unicast Reverse Path Forwarding (uRPF)
  • Implement IP Source Guard
  • Implement authentication, authorization, and accounting (AAA) (configuring the AAA server is not required, only the client-side (IOS) is configured)
  • Implement Control Plane Policing (CoPP)
  • Implement Cisco IOS Firewall
  • Implement Cisco IOS Intrusion Prevention System (IPS)
  • Implement Secure Shell (SSH)
  • Implement 802.1x
  • Implement NAT
  • Implement routing protocol authentication
  • Implement device access control
  • Implement security features

Implement Network Services

  • Implement Hot Standby Router Protocol (HSRP)
  • Implement Gateway Load Balancing Protocol (GLBP)
  • Implement Virtual Router Redundancy Protocol (VRRP)
  • Implement Network Time Protocol (NTP)
  • Implement DHCP
  • Implement Web Cache Communication Protocol (WCCP)

Implement Quality of Service (QoS)

  • Implement Modular QoS CLI (MQC)
    • Network-Based Application Recognition (NBAR)
    • Class-based weighted fair queuing (CBWFQ), modified deficit round robin (MDRR), and low latency queuing (LLQ)
    • Classification
    • Policing
    • Shaping
    • Marking
    • Weighted random early detection (WRED) and random early detection (RED)
    • Compression
  • Implement Layer 2 QoS: weighted round robin (WRR), shaped round robin (SRR), and policies
  • Implement link fragmentation and interleaving (LFI) for Frame Relay
  • Implement generic traffic shaping
  • Implement Resource Reservation Protocol (RSVP)
  • Implement Cisco AutoQoS

Troubleshoot a Network

  • Troubleshoot complex Layer 2 network issues
  • Troubleshoot complex Layer 3 network issues
  • Troubleshoot a network in response to application problems
  • Troubleshoot network services
  • Troubleshoot network security

Optimize the Network

  • Implement syslog and local logging
  • Implement IP Service Level Agreement SLA
  • Implement NetFlow
  • Implement SPAN, RSPAN, and router IP traffic export (RITE)
  • Implement Simple Network Management Protocol (SNMP)
  • Implement Cisco IOS Embedded Event Manager (EEM)
  • Implement Remote Monitoring (RMON)
  • Implement FTP
  • Implement TFTP
  • Implement TFTP server on router
  • Implement Secure Copy Protocol (SCP)
  • Implement HTTP and HTTPS
  • Implement Telnet

Evaluate proposed changes to a Network

  • Evaluate interoperability of proposed technologies against deployed technologies
    • Changes to routing protocol parameters
    • Migrate parts of a network to IPv6
    • Routing Protocol migration
    • Adding multicast support
    • Migrate spanning tree protocol
    • Evaluate impact of new traffic on existing QoS design
  • Determine operational impact of proposed changes to an existing network
    • Downtime of network or portions of network
    • Performance degradation
    • Introducing security breaches
  • Suggest Alternative solutions when incompatible changes are proposed to an existing network
    • Hardware/Software upgrades
    • Topology shifts
    • Reconfigurations

5 Days

Duration

This is a QA approved partner course

Delivery Method

Delivery method

Classroom

Face-to-face learning in the comfort of our quality nationwide centres, with free refreshments and Wi-Fi.

Trusted, awarded and accredited

Fully accredited to ensure we provide the highest possible standards in learning

All third party trademark rights acknowledged.