This course is designed for those Network and/or System administrators tasked with the installation, configuration, and maintenance of the Network Node Manager i Software (NNMi) product. This course teaches the skills needed to successfully implement the product to manage small, medium, or large networked enterprises. The course includes training on the NNM i Smart Plug-In (NNM iSPI) Performance for Metrics Software.

This course is designed for administrators of the NNMi software 10.x application.

The hands-on lab exercises in this course use NNMi software version 10.0.

Read more


To maximize success in this course, students should have a working knowledge the following topics:

  • Windows system administration
  • Network protocols
  • Network device administration

Target group description

This course is intended for network or system administrators and network engineers seeking a more in-depth knowledge of Network Node Manager i Software 10.x.

Read more

Delegates will learn how to

At the end of the course, you should be able to:

  • Configure network discovery
  • Manipulate NNMi tables and device object records
  • Design topology maps
  • Configure incidents
  • Generate performance graphs
  • Generate performance reports
  • Perform core administration tasks
Read more


Module 1: Introduction to HP Network Node Manager i (NNMi) Software

  • Course Objectives
  • Configure network discovery
  • Manipulate NNMi tables and device object records
  • Design topology maps
  • Configure incidents
  • Generate performance graphs
  • Generate performance reports
  • Perform core administration tasks

Module 2: Managing SNMP and ICMP Communication

  • Configure authentication for SNMPv1, SNMPv2, SNMPv3 (individual, region, type, filter, default)
  • Configure alternative authentication names
  • Use an alternate SNMP port or timeout
  • Use an SNMP proxy
  • Use the SNMP Command Line Interface (CLI)

Module 3: Discovery Architecture and Operation

  • Describe what NNMi discovers, how far, which objects
  • Describe how NNMi groups discovered objects
  • Describe how NNMi discovers connectivity
  • Describe limits of duplicate IP address management

Module 4: Configuring Discovery

  • Turn auto-discover (inventory) on/off
  • Schedule discovery
  • Initiate manual discovery (single, group, all nodes)
  • Expand discovery (single node, from file, for region)
  • Limit discovery (filter by region, type, node or interface level, before/after SNMP query)
  • Recheck node configuration
  • Recheck connectivity
  • Remove discovered objects (individually, by filter, by region)

Module 5: Using the Management Console

  • Start the NNMi console
  • Locate workspaces
  • Navigate tables, maps, views, and forms
  • Access object details
  • Sort and filter tables

Module 6: Configuring Node and Interface Groups

  • Describe how node and interface groups are applied in NNMi
  • Configure a group by object type, region, specific object, default
  • Use advanced filtering on object capabilities

Module 7: Customizing Views

  • Create a map of a node group
  • Place the map in the list of topology maps
  • Control the default map displayed when the console opens
  • Add a background to a map
  • Control status propagation
  • Add connections to Path View maps

Module 8: Status Monitoring Architecture and Operation

  • Differentiate between fault monitoring and performance monitoring
  • Identify data gathered for interface monitoring and component health
  • Describe the roles of State Poller and Causal Engine
  • Describe the operation of neighbor analysis

Module 9: Customizing Status Monitoring

  • Turn polling on/off (specific nodes, region, type)
  • Set polling interval by node or interface group
  • Set objects to out-of-service mode
  • Select polling protocol and set of data to be gathered
  • Verify the polling settings for an object
  • Perform an on-demand status poll of an object
  • Check polling backlog/performance
  • Exclude objects from status polling (individual, region, type)

Module 10: Configuring Users

  • Configure a user account for each of your NNMi users with the appropriate capabilities
  • Describe what each user group may access in the console
  • Configure Custom Security groups
  • Configure tenants
  • Configure command-line permissions
  • Audit account activity

Module 11: Troubleshooting Network Issues

  • Describe the incident life cycle, assignments and ownership, and states
  • View network incidents and incident details
  • Sort and filter incidents
  • Assign and reassign incidents
  • Delete an incident
  • Annotate an incident
  • View historical incidents (closed)
  • Cross-launch to graphical visualization
  • Interpret root cause incidents
  • Launch and interpret network visualization (different types)
  • List nodes, interfaces, and addresses in the network
  • View object details
  • Filter a view by node group or interface group
  • Invoke troubleshooting tools
  • Check the status and configuration of a device
  • Display incidents for a device

Module 12: Troubleshooting Using MIBs

  • Describe the use of Management Information Base (MIB) browsing and graphing during troubleshooting
  • Graph MIB data
  • Browse MIB data

Module 13: Event Monitoring Architecture

  • Describe event sources and processing

Module 14: Customizing Event Monitoring

  • Add and delete event definitions
  • Customize event category/severity/message
  • Create a new category or family
  • Add vendor trap definitions
  • Exclude an event from display
  • Block trap storms
  • Block reception of events

Module 15: Thresholds and Customed MIB Monitoring

  • Configure iSPI Performance for Metrics Software thresholds and incidents
  • Configure Custom Polling Threshold Monitoring

Module 16: iSPI Performance for Metrics Software Architecture

  • Describe how NNMi passes data to the iSPI for Performance Metrics Software
  • Describe how the iSPI Performance for Metrics Software stores data
  • Perform basic troubleshooting steps
  • Verify that data are being collected by NNMi
  • Verify that collected data is being used by the iSPI Performance for Metrics Software
  • Check that the iSPI Performance for Metrics Software is configured properly
  • Start the iSPI Performance for Metrics Software service
  • Verify that performance polling is enabled
  • Verify that the iSPI Performance for Metrics Software Home Page opens

Module 17: Viewing Performance Data and Reports

  • List the reports available from the iSPI Performance for Metrics Software
  • Explain the difference between Reports and Live Reports
  • Modify the report settings to change the way a report displays data
  • Create Custom Dashboards

Module 18: Administering NNMi

  • Customize NNMi console settings
  • Back up NNMi data and configuration
  • Check NNMi health from the GUI
  • Locate NNMi log files
  • Move from test to production (import/export tools)

Module 19: Managing Virtualization

  • Identify the Hypervisor (ESXi Server) hosting a virtual machine (VM)
  • Use a loom map to identify the hosting Hypervisor's Network Interface Card (NIC) that the Virtual Machine is connected to
  • Use a wheel map to identify the hosting hypervisor's Network Interface Card (NIC) that the Virtual Machine is connected to.

Appendix A: iSPI Engineering Toolset

  • Describe the functionality provided by the iSPI Network Engineering Toolset
  • Generate Incident-triggered diagnostic execution
  • Generate Trap Analytics reports
Read more

Why choose QA

Dates & Locations

Frequently asked questions

See all of our FAQs

How can I create an account on myQA.com?

There are a number of ways to create an account. If you are a self-funder, simply select the "Create account" option on the login page.

If you have been booked onto a course by your company, you will receive a confirmation email. From this email, select "Sign into myQA" and you will be taken to the "Create account" page. Complete all of the details and select "Create account".

If you have the booking number you can also go here and select the "I have a booking number" option. Enter the booking reference and your surname. If the details match, you will be taken to the "Create account" page from where you can enter your details and confirm your account.

Find more answers to frequently asked questions in our FAQs: Bookings & Cancellations page.

How do QA’s virtual classroom courses work?

Our virtual classroom courses allow you to access award-winning classroom training, without leaving your home or office. Our learning professionals are specially trained on how to interact with remote attendees and our remote labs ensure all participants can take part in hands-on exercises wherever they are.

We use the WebEx video conferencing platform by Cisco. Before you book, check that you meet the WebEx system requirements and run a test meeting (more details in the link below) to ensure the software is compatible with your firewall settings. If it doesn’t work, try adjusting your settings or contact your IT department about permitting the website.

Learn more about our Virtual Classrooms.

How do QA’s online courses work?

QA online courses, also commonly known as distance learning courses or elearning courses, take the form of interactive software designed for individual learning, but you will also have access to full support from our subject-matter experts for the duration of your course. When you book a QA online learning course you will receive immediate access to it through our e-learning platform and you can start to learn straight away, from any compatible device. Access to the online learning platform is valid for one year from the booking date.

All courses are built around case studies and presented in an engaging format, which includes storytelling elements, video, audio and humour. Every case study is supported by sample documents and a collection of Knowledge Nuggets that provide more in-depth detail on the wider processes.

Learn more about QA’s online courses.

When will I receive my joining instructions?

Joining instructions for QA courses are sent two weeks prior to the course start date, or immediately if the booking is confirmed within this timeframe. For course bookings made via QA but delivered by a third-party supplier, joining instructions are sent to attendees prior to the training course, but timescales vary depending on each supplier’s terms. Read more FAQs.

When will I receive my certificate?

Certificates of Achievement are issued at the end the course, either as a hard copy or via email. Read more here.

Contact Us

Please contact us for more information